![]() Basically, a slanted roof style is a flat roof tilted high up at one edge to create a very steep slope. It’s similar to a shed or lean-to roof, or a clerestory roof, but has one visible difference. I didn’t want ridges or valleys which are a lot of work and can leak. I decided to take full advantage of the regulations and build a 10 x 14 shed. I’d seen a lot of sheds but had some specific ideas in mind, after doing some research I came up with my shed style. Here’s my setup: I reviewed what I needed to fit in the shed today, considered a few wants for the future, looked at my budget, and came up with the size. Step 3: Choose Size and the Style of the Shed Included in their reply was also a list of approved materials for exterior siding which was useful. ![]() The regulations allowed a storage shed to be built in the side yard, backyard, or in the rear setback but never over the septic field. Also, the maximum height of a shed, measured from ground level to the highest peak of the roof, is set at 14′ and must never exceed the height of the house. The size of the shed would be calculated by the foundation footprint. They confirmed that I didn’t need any permits and included other helpful information. I emailed the local building department to see how they measure the shed size by outside perimeter foundation footprint, or the roof projection. To be safe, I also checked with my neighborhood association to see if they had any restrictions.Īccording to my town regulations, I could build a shed up to 10×14 without a building permit. I then checked with the local utilities to ensure my shed wouldn’t interfere with their services. Are there any restrictions on building materials?.What is the greatest size shed I can build without, and with, a permit?.My first step was to look up the local building regulations for some answers: Elevated would mean drier and it would last longer.I didn’t want my shed sitting on the ground.Something easy and practical I could build on my own.Due to the climate and a lot of snow, it needed a greater slope.Thinking about my other shed, I made a list: I planned out my requirements I didn’t want any fancy features or dormers. I’d even have space to store some building materials instead of in the garage. I wouldn’t have to move the lawn mower to get to the ladder, or the snowblower to dig out the generator. I decided to build a bigger shed with more space. ![]() How to Build a Slanted Roof Shed: Step by Step Step 1: Gathering RequirementsĪs I began thinking about my new shed, I considered my needs.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |